1250 Mesh Modified Ultrafine Precipitated Barium Sulfate - Ultra-Fine Powder for Coatings

‌Product Overview‌

Modified Ultrafine Precipitated Barium Sulfate represents a ‌next-generation functional filler‌ engineered through advanced crystallization and surface modification technologies. Unlike conventional barium sulfate, this ultrafine variant combines nano-scale particle control (D50: 0.2–0.5 μm) with organosilane coupling agents to deliver unparalleled dispersion stability, interfacial adhesion, and process adaptability across coatings, polymers, and specialty chemical formulations. Certified to ISO 3262-7 standards, it achieves 98% purity with <50 ppm heavy metal content, making it ideal for applications demanding both performance excellence and regulatory compliance (REACH/ROHS/GB9685).

‌Enhanced Technical Properties‌

‌1. Particle Morphology Optimization‌

• ‌Ultrafine particle engineering‌:
  • Primary particle size: 0.1–0.8 μm (SEM verified)
  • Narrow distribution: Span value <1.2 (D90/D10 ratio)
  • Spherical-aggregate morphology reduces abrasion wear
• ‌Surface treatment innovations‌:
  • Dual-layer modification: Silane + stearic acid coating
  • Contact angle: ≤15° (hydrophilic) or ≥120° (hydrophobic variants)

‌2. Performance Advantages vs. Standard BaSO₄‌

‌Specialized Packaging & Handling Protocol‌

‌1. Advanced Packaging Solutions‌

• ‌Primary packaging‌:
  • 25kg laminated polyethylene inner bag
  • Triple-seam heat sealing (ISO 2230 compliant)
• ‌Secondary packaging‌:
  • Option A: UV-resistant PP woven bag (120g/m²) with machine-stitched closure
  • Option B: 5-layer kraft paper bag (500gsm) with water-repellent coating
• ‌Palletization‌:
  • 40 bags/pallet (1,000kg) with stretch film & corner protectors

‌2. Storage & Logistics Guidelines‌

• ‌Warehousing requirements‌:
  • Temperature: 10–30°C (50–86°F)
  • Humidity: ≤60% RH (desiccant packets included)
  • Separation: Minimum 1m from acids/oxidizers
• ‌Shelf life‌:
  • 36 months in original packaging (accelerated aging tested per ASTM F1980)

‌Critical Handling Precautions‌

‌1. Operational Safety‌

• ‌Dust control‌:
  • Use local exhaust ventilation (LEV) during transfer
  • OSHA PEL: 15mg/m³ (total dust), 5mg/m³ (respirable fraction)
• ‌Fire prevention‌:
  • Non-combustible (NFPA 704: 0-0-1 rating)
  • Ground containers during filling to prevent static

‌2. Quality Preservation‌

• ‌Moisture protection‌:
  • Reseal opened bags with vacuum clamp immediately
  • Critical moisture threshold: >0.5% causes agglomeration
• ‌Contamination avoidance‌:
  • Dedicated stainless steel scoops/tools required
  • ISO Class 7 (10,000级) environment recommended

‌Multidisciplinary Applications‌

‌I. High-Performance Coatings‌

1. ‌Automotive OEM Finishes‌
   • Electrophoretic primers: 15–25% loading reduces cratering
   • Metallic basecoats: Enhances flake orientation (DOI >90)
2. ‌Marine Antifouling Systems‌
   • Cuprous oxide carrier in SPC coatings (IMO compliant)
   • 40% reduction in biocide leaching rate

‌II. Engineering Plastics‌

‌III. Specialty Chemical Formulations‌

1. ‌Lithium-Ion Batteries‌
   • Cathode slurry stabilizer (LiFePO₄ systems)
   • Reduces binder content by 20% while maintaining adhesion
2. ‌Inkjet Receptive Layers‌
   • Microporous structure improves ink drying speed (3x faster)
   • Maintains 98% color gamut in pigment-based inks

‌Formulation Guidelines‌

‌1. Optimal Incorporation Methods‌

• ‌Dry blending‌:
  • Premix with polymer pellets (1:2 ratio) before extrusion
  • Twin-screw compounding: Zone 1 temp ≤180°C
• ‌Wet dispersion‌:

  ‌System‌	‌Dispersant Recommendation‌
  Waterborne coatings	Polyacrylate ammonium salt (0.3–0.8%)
  Solvent-based inks	Hyperbranched polyester (0.5–1.2%)
  UV-curable resins	Silicone acrylate (0.1–0.3%)

‌2. Compatibility Matrix‌

‌Quality Assurance & Certifications‌

‌1. Analytical Testing‌

• ‌Particle characterization‌:
  • SEM-EDS for elemental mapping
  • XRF for BaSO₄ purity verification
• ‌Performance validation‌:
  • QUV-B 500h gloss retention ≥85%
  • 50-cycle thermal shock (-40°C↔85°C)

‌2. Compliance Documentation‌

• ‌Safety‌: SDS compliant with GHS Rev.10
• ‌Food contact‌: FDA 21 CFR 178.3297
• ‌Sustainability‌: GRAS designation, Carbon footprint ≤1.2kg CO₂/kg

‌Technical Support Services‌

• ‌Application development‌:
  • DOE (Design of Experiments) for optimal loading ratios
  • Rheology modeling using MFi vs. filler content curves
• ‌Troubleshooting‌:
  • FTIR analysis of interface bonding failures
  • Cross-section SEM for dispersion evaluation

‌Competitive Advantages‌

1. ‌Zero VOC Contribution‌: Water-washed production process
2. ‌Global Supply Chain‌: FDA-approved facilities in 3 continents
3. ‌Custom Modification‌: Tailored surface energy (20–50mN/m)
4. ‌Batch Consistency‌: Six Sigma controlled (Cpk≥1.67)

‌Conclusion‌

This modified ultrafine precipitated barium sulfate redefines functional filler performance through precision engineering at the nanoscale. Its unique combination of particle size control, surface functionality, and chemical purity enables formulators to overcome traditional limitations in opacity development, mechanical reinforcement, and process efficiency. Whether enhancing the scratch resistance of automotive clearcoats or improving the dimensional stability of engineering plastics, this advanced material delivers measurable performance gains while reducing total system costs. Backed by comprehensive technical support and global regulatory compliance, it stands as the intelligent choice for next-generation material science challenges.

TDD-Global.com is a professional China chemical B2B marketplace operated by IBI Company, dedicated to promoting global communication, business negotiation, and market expansion in the chemical industry. With a strong network of China chemical product suppliers and international buyers, TDD-Global creates a dynamic and efficient platform for sourcing, trading, and cooperation.

Under the brand name TUDUODUO, TDD-Global has built a trusted reputation among suppliers and buyers in sectors such as fine chemicals, raw materials, industrial additives, and advanced chemical solutions. We offer a wide range of services including product listing, online promotion, supply chain solutions, and international marketing support.

Our platform connects hundreds of verified China chemical suppliers with buyers worldwide, fostering transparent transactions, better business opportunities, and high-value partnerships. Whether you are looking for bulk commodities, specialty chemicals, or customized procurement services, TDD-Global is your go-to platform.

Driven by the innovative spirit of IBI Company, we are committed to building a smarter, faster, and more reliable global chemical trade ecosystem.

If you are interested in cooperation, strategic partnerships, or customized chemical sourcing, please feel free to contact us. Let's shape the future of the chemical industry together!